Sales & Support: Request A Quote
Home ProductsLogging Tools

Small Diameter Measurement While Drilling

Small Diameter Measurement While Drilling

Small Diameter Measurement While Drilling

Product Details:

Place of Origin: China
Brand Name: Ericco
Contact Now
Detailed Product Description

Small Diameter Measurement While Drilling (MWD-Φ38mm)

ER-MWD38S Measurement While Drilling (MWD)


Introduction :

Small Diameter Measurement While Drilling (MWD-Φ38mm) is a kind of small-path mud pulse wireless in-drilling inclinometer. This is a new product developed following the ER-MWD48 Measurement While Drilling . This product not only inherited the characteristics of high precision, high stability and high vibration resistance of the ER-MWD48inclinometer, but also more extensive applications.



1.ER-MWD38S Measurement While Drilling can be used for the construction of conventional wellbore like the ER-MWD48 Measurement While Drilling . Different diameters can be selected according to the conditions of on-site drilling tools (diameter of the drill collar Ф50.8mm, Ф71.4mm) Rubber wings to suit different drilling tools.
2.The external diameter of the instrument is Ф38mm. In the construction of small wellbore, the hole of the non-magnetic drilling tool may not be reamed (diameter of the drill collar is Ф50.8mm), which reduces the erosion of the drilling tool and enhances the safety of the downhole drilling tool.
3.When used in conventional large borehole construction, the muddy water circulation area of the non-magnetic drill collar is relatively increased, erosion of the drilling equipment and drilling tool is reduced, and the safety construction of the well team is facilitated.
4.It is more suitable for the second and third development of oil wells and small hole operations such as window sidetrack drilling. Also suitable for use with coiled tubing to connect MWD.
5.The underground electrical connection adopts self-locking air plug + cord connection, which makes the instrument connection convenient and reliable, and improves the reliability of the instrument.
6.The electronic chamber of the pulse generator and the gamma probe share a compression cylinder. The user can select conventional gamma or orientation gamma. Became one of the first manufacturers in China to use the Ф38mm outer diameter directional gamma wireless MWD system.
7.ER-MWD48 and ER-MWD38S are compatible with ground equipment, reducing the cost of using.
8.Ground equipment can be selected for wireless or wired transmission.



ParameterMeasuring range & accuracy
Inclination0 – 180°/±0.1°
Azimuth0 – 360°/±1°
Tool Face Angle0 – 360°/±2°
Pulse TypePositive pulse

The gamma probe is integrated in the pulsar and is approximately

1500mm closer to the drill than the conventional gamma short

section (optional gamma orientation)

Operating Temperature150℃
Mud Displacement10~55L/S
Outside Diameter38.1mm/1.5”(Pulse section-48mm/1.875”)
Downhole Power SupplyLithium battery 21-28.8V DC(Can connect two battery segments)
Battery LifeSingle battery more than 1300 hours
Impact Resistance1000g, 0.5msec(Half shaft sine wave)
Anti-vibration20g RMS 15-500Hz
Pressure Tube100 MPa
Temperature Limit0℃ - 125℃
Total Length of Downhole Tool String6.0m(No gamma) ; 6.7m(With gamma)
Instrument Pressure Drop(50~200)PSI
Mud Sediment Content≤1%
Mud Weight≤2.2 g/cm3
Mud Viscosity (Funnel Viscosity)≤140s
Mud Signal Strength(50~100)PSI
Adaptable to DrillCollar3.125”~8”

Contact Details
Ericco International Limited.

Send your inquiry directly to us (0 / 3000)